GLOBAL BEST DAEKWANG

고객의 가치창조와 고객의 지속성장을
위하여 우리는 최선을 다합니다.

HOME >상품상세화면
[단종]파워미터/소비전력계 WT310
  • [단종]파워미터/소비전력계 WT310
단종

[단종]파워미터/소비전력계 WT310

공유
특징
AC/ DC 600V, AC/ DC 20A, 100 KHz, RS-232
Harmonics 옵션 기능 포함
모델명
WT310/G5
브랜드
YOKOGAWA
원산지
JAPAN
무상보증기간
2년
배송비
0원 / 주문시결제(선결제) 조건별배송 지역별추가배송비
방문 수령지 : 서울특별시 구로구 디지털로 288 (대륭포스트타워1차) 1404호
판매가
단종
상품코드
1000001353

상품상세정보

 

 

 

 

 


The WT310 is a single phase, portable unit, with the capability of measuring low currents from 50 micro-Amps up to 20 Amps RMS and a voltage ranges from 15 to 600 Volts RMS. The WT310 was designed to accurately measure conversion circuits that use energy saving switching techniques that can cause distorted voltage or current waveforms with high harmonic content. A high resolution sixteen bit Analog to Digital converter, a digitizing rate of 100 kS/s and a bandwidth from DC and 0.5 Hz to 100 kHz allow the WT310 to perform these complicated measurements with ease. 


An optional Harmonic Analysis function is a must for design and test engineer in product evaluation and power quality testing. Normal power parameters and Harmonic data are measured simultaneously, providing faster, more accurate power analysis. Harmonic Analysis and THD Computations can be calculated up to the 50th order from a 50 or 60 Hertz fundamental frequency. The Integration function measures Amp-Hour and Watt-Hour parameters. A new Auto Range feature has been added to the Integration, which is especially important for stand-by-power measurements. In the stand-by mode the current can be very low. Then when the device goes to operation mode, the current can increase substantially. The new Auto Range feature optimizes the range setting for maximum accuracy measurements. Yokogawa’s "Average Active Power" function makes it possible to measure power consumption under conditions where the power fluctuates greatly. Watt-hours are measured over some time period, then the time is divided out to leave an average power reading. This is the preferred method for Stand-by-Power measurements. All industry standard communication interface ports such as USB, GPIB, RS232C and Ethernet are available for the WT300 Series of Power Meters. The standard interface is USB plus GPIB or RS232C, with Ethernet as an available option. Yokogawa’s WTViewer Free Plus software is provided with each WT300 unit. IEC62301 software for stand-by-power measurements is also available as a free download.



Key Features


Basic Accuracy of 0.1% of Reading 

Low Current Measurement down to 50 micro-Amps 

DC, 0.5 Hz to 100 kHz Frequency Range 

Standard USB, and GPIB or RS232 Interfaces 

Ideal for Production, Testing, Evaluation and R&D.



Spec


Yokogawa WT300 Series Power Meter

Model

WT310

Power Measurement

1 element

Available with 20A input element

Basic power accuracy

0.1% rdg +0.2% of range

Power frequency range

DC, 0.5 Hz to 100 kHz

Frequency range

1 Hz, 10 Hz, 100 Hz, 1 kHz, 10 kHz, and 100 kHz. (autoranging

Sampling Speed

approximately 100 kS, s

Effective Input for V , A

1% to 130%

Maximum Input for V , A

1% to 140%

Inputs

Crest Factor: Maximum 300

 

Voltage

(for crest factor 3)

15V, 30V, 60V, 150V, 300V, 600V 

(for crest factor 6)

7.5V, 15V, 30V, 75V, 150V, 300V

Direct Input:

Current

(for crest factor 3)

5mA, 10mA, 20mA, 50mA, 100mA, 200mA, 0.5A, 1A, 2A, 5A, 10A, 20A

(for crest factor 6)

2.5mA, 5mA, 10mA, 25mA, 50mA, 100mA, 0.25A, 0.5A, 1A, 2.5A, 5A, 10A

External Input 2 

Current Sensor

(for crest factor 3)

2.5V, 5V, 10V

(for crest factor 6)

1.25V, 2.5V, 5V

External Input 2

Current Sensor

(for crest factor 3)

2.5V, 5V, 10V or EX2: 50mV, 100mV, 200mV, 500mV, 1V, 2V

(for crest factor 6)

1.25V, 2.5V, 5V or EX2: 25mV, 50mV, 100mV, 250mV, 500mV, 1V

Measurement Parameters

Voltage, current, active power, reactive power, apparent power, power factor, phase angle, frequency, peak voltage, peak current, crest factor, integration (Wh, Ah, varh, Vah), time, %

Measurement Parameters

MAX hold
Voltage RMS, MEAN simultaneous measurement
Average active power (user defined function)
Active power integration (WP) (Wh)
Apparent power integration (WS) (VAh)
Reactive power integration (WQ) (varh)

Display

7-segment LED, 4 items – Simultaneous display



Ordering Information


Contents 

WT310(C2:RS- 232, G5:Harmonics Measurement) Digital Power Meter

Power cord

Rubber foot(1set)

Current input protective cover

Start up guide

Connector (provided only with /DA4 or /DA12, each 1set)

Safety terminal adapter

CD



※ 자세한 사항은 'DataSheet'나 'Manual'을 참조해 주세요.



 

 

상품필수 정보

품명 및 모델명 상품상세 참조 제조국 또는 원산지 상품상세 참조
제조자, 수입품의 경우 수입자를 함께 표기 상품상세 참조 A/S 책임자와 전화번호 또는 소비자상담 관련 전화번호 상품상세 참조
법에 의한 인증·허가 등을 받았음을 확인할 수 있는 경우 그에 대한 사항 상품상세 참조

배송안내

- 배송비 : 기본배송료는 3,000원 (제주도 및 일부 도서산간 지역은 배송비가 추가됩니다.) 

    \200,000원 이상 구매시 무료배송

- 오후 5시 이전 주문시 통상적으로 당일 발송

제품 품절인 경우가 있기 때문에 납기일 확인 후 주문 부탁드립니다.

- 배송예정일은 주문시점(주문순서)에 따른 유동성이 발생하므로 평균 배송일과는 차이가 발생할 수 있습니다.

- 본 상품의 배송 가능일은 결제완료 된 날로부터 2~3 영업일입니다. 배송 가능일이란 본 상품을 주문 하신 고객님들께 상품 배송이 가능한 기간을 의미합니다.

 

 

교환 & 반품안내

 

- 특수 제품, 주문 제품 등의 경우, 그 특성상 주문이 접수된 후 취소 및 환불이 불가합니다. 주문 전 충분히 상담하신 후 구매해 주세요.

  (특수 제품이란, 보유제품이 아닌 주문 후 생산하며 출고하는 제품을 말합니다.)  

- 제품 특성상 주문이 접수된 후 단순 변심에 의한 취소 및 환불은 당일에 한해 가능합니다. (취소및 환불 접수전 반드시 고객센터를 통해 연락바랍니다.)

- 전자 제품 특성상 제품포장 개봉 후에는 교환 및 환불이 불가능합니다. (제품 하자 제외) 

- 모든 교환·반품은 수령 후 7일 이내 접수되어야 하며, 접수 전에 고객센터로 문의해 주셔야 진행이 가능합니다. 

- 미개봉 제품의 경우, 받으신 날로부터 7일 이내 접수하시면 교환이 가능합니다.

- 개봉하신 제품은 7일 이내라도 교환이 불가합니다.(제품 하자 제외)

- 배송된 날로부터 7일이 지나면 어떤 교환·반품도 불가하므로 받으시면 제품 상태를 꼭 확인해 주세요. (제품 하자 포함) 

- 소비자 변심에 의한 교환은 왕복 운임을 부담하셔야 합니다.

 

환불안내

 

- 상품 청약철회 가능기간은 상품 수령일로 부터 7일 이내 입니다.

- 주문 제품, 특수 제품의 경우 교환/반품이 불가합니다.

- 주문 전 충분한 상담을 하신 후, 신중히 구매해 주세요.

- 환불신청시 왕복 운송료를 부담하셔야 합니다. 

 

AS안내

 

소비자분쟁해결 기준(공정거래위원회 고시)에 따라 피해를 보상받을 수 있습니다.

 

:: A/S 처리 문의 ::

전화 : 02) 2617-0787

E-MAIL : kdk@kdk.co.kr

 

⊙ A/S처리기간은 5일~4주 정도로, 제품에 따라 상이합니다. 

  

⊙ 무상보증수리 : 제조사의 품질보증 기간에 따라 다릅니다. 무상보증 수리기간은 일반적으로 1년, 3년입니다.

    무상보증수리를 위한 왕복 배송료는 대광계측기(주)에서 부담합니다.

    단, 무상보증기간일지라도 소모품 교체나 소비자 과실일 경우 비용이 추가될 수 있습니다.

     

⊙ 유상수리 : 무상보증 기간이 지난 제품에 이상이 생겼을 경우에는 유상수리를 하셔야 합니다.

       기본적으로, 수리를 위해 대광계측기(주)로 보내시는 배송료는 고객 부담, 받으시는 배송료는 대광계측기(주)에서 부담합니다.

       타사에서 구입한 제품도 대광계측기(주)에서 수리 가능합니다. 

이미지 확대보기[단종]파워미터/소비전력계 WT310

[단종]파워미터/소비전력계 WT310
  • [단종]파워미터/소비전력계 WT310
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동